This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again, but selecting Disallow Cookies will mean you are unable to log into the forum and functionality will be resticted when viewing the forum as a guest. Clearing your Browser Cookies will allow you to reset your cookies choice for this forum

By clicking this Link you help to Support this Forum when you buy any items from AMAZON
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Draytek 130 help
#41
Think this is coming from DSLAM and so not in your regulation.

Reply

#42
(31-07-2018, 06:37 AM)UK Sentinel Wrote: Nice stats, without rebooting modem, it will be interesting to run the command - vdsl status - in a couple of days to see if indeed the DrayTeK picks up any line speed changes?


Draytek lost connection so grabbed status again -

vdsl status

 ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
  Running Mode            :      17A       State                : SHOWTIME
  DS Actual Rate          : 41469000 bps   US Actual Rate       : 11660000 bps
  DS Attainable Rate      : 41788344 bps   US Attainable Rate   : 11742694 bps
  DS Path Mode            :        Fast    US Path Mode         :        Fast
  DS Interleave Depth     :        1       US Interleave Depth  :        1
  NE Current Attenuation  :       20 dB    Cur SNR Margin       :        6  dB
  DS actual PSD           :     6. 4 dB    US actual PSD        :    12. 8  dB
  NE CRC Count            :       88       FE CRC Count         :      386
  NE ES Count             :        4       FE  ES Count         :      269
  Xdsl Reset Times        :        0       Xdsl Link  Times     :        2
  ITU Version[0]          : b5004946       ITU Version[1]       : 544e0000
  VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]
  Power Management Mode   : DSL_G997_PMS_L0
  Test Mode               : DISABLE
 -------------------------------- ATU-C Info ---------------------------------
  Far Current Attenuation :       27 dB    Far SNR Margin       :        6  dB
  CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544ed086
  DSLAM CHIPSET VENDOR    : < IFTN >

vdsl status more

 ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
                 Near End        Far End    Note
Trellis      :      1               1
Bitswap      :      0               1
ReTxEnable   :      0               0
VirtualNoise :      0               0
20BitSupport :      0               0
LatencyPath  :      0               0
LOS          :      0               0
LOF          :      0               0
LPR          :      0               0
LOM          :      0               0
SosSuccess   :      0               0
NCD          :      0               0
LCD          :      0               0
FECS         :   1852            13231 (seconds)
ES           :      4             269 (seconds)
SES          :      1               7 (seconds)
LOSS         :      0               0 (seconds)
UAS          :     39            15689 (seconds)
HECError     :      0               0
CRC          :     88             386
RsCorrection :      0               0
INP          :      0               0 (symbols)
InterleaveDelay :      0               0 (1/100 ms)
NFEC         :    255             255
RFEC         :     16              16
LSYMB        :   3128            11115
INTLVBLOCK   :    255             255
AELEM        :      0            ----
Reply

#43
Do you know what caused the drop-out, looks like you have lost a couple of Mb on Downstream, but good to see SNR and Attenuation have remained the same as previous results.

Alas this does not answer your original question regarding the DrayTeK 130 capturing line synch speeds changing without modem rebooting, so best to try again after weekend and see if DS Actual Rate and DS Actual Rate change
UK Sentinel


DrayTeK 130 Modem connected to Netgear XR500, ASUS RT-AC86U then connected to Netgear XR500 

Reply

#44
(03-08-2018, 06:55 PM)UK Sentinel Wrote: Do you know what caused the drop-out, looks like you have lost a couple of Mb on Downstream, but good to see SNR and Attenuation have remained the same as previous results.

Alas this does not answer your original question regarding the DrayTeK 130 capturing line synch speeds changing without modem rebooting, so best to try again after weekend and see if DS Actual Rate and DS Actual Rate change

Not sure, we were on our tablets and phones and we lost internet, after a few minutes it came back.
Reply

#45
At least it was not a power cut etc, probable just the DSLAM/Cabinet doing a resynch to adjust your speeds slightly.


Let us know what setting are on say Monday if possible ?
UK Sentinel


DrayTeK 130 Modem connected to Netgear XR500, ASUS RT-AC86U then connected to Netgear XR500 

Reply

#46
Today’s Stats

vdsl status

---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 41469000 bps US Actual Rate : 11660000 bps
DS Attainable Rate : 44409816 bps US Attainable Rate : 11758524 bps
DS Path Mode : Fast US Path Mode : Fast
DS Interleave Depth : 1 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 7 dB
DS actual PSD : 6. 4 dB US actual PSD : 12. 9 dB
NE CRC Count : 1300 FE CRC Count : 391
NE ES Count : 958 FE ES Count : 274
Xdsl Reset Times : 0 Xdsl Link Times : 2
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >

vdsl status more

---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 0 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 17129 13259 (seconds)
ES : 958 274 (seconds)
SES : 1 7 (seconds)
LOSS : 0 0 (seconds)
UAS : 39 15689 (seconds)
HECError : 0 0
CRC : 1300 391
RsCorrection : 0 0
INP : 0 0 (symbols)
InterleaveDelay : 0 0 (1/100 ms)
NFEC : 255 255
RFEC : 16 16
LSYMB : 3128 11115
INTLVBLOCK : 255 255
AELEM : 0 ----
Reply

#47
This is positive, your DS Attenable Rate was as below and has increased without modem reboot, so at least it looks like the DrayTeK does capture minor line synch changes without re-boot needed

OLD Readings: - DS Attainable Rate      : 41788344 bps   US Attainable Rate   : 11742694 bps

Latest Readings - DS Attainable Rate : 44409816 bps US Attainable Rate : 11758524 bps

Your SNR value has also changed from 7 to 6, so explains why you have an increase, alas you are still stuck with 44 (ish) Mbps, so until G.INP is enabled on IFTN DLAMS/Exchanges in UK etc , that's as good as its going to get for yourself.
UK Sentinel


DrayTeK 130 Modem connected to Netgear XR500, ASUS RT-AC86U then connected to Netgear XR500 

Reply

#48
(06-08-2018, 06:25 PM)UUK Sentinel Wrote: This is positive, your DS Attenable Rate was as below and has increased without modem reboot, so at least it looks like the DrayTeK does capture minor line synch changes without re-boot needed

OLD Readings: - DS Attainable Rate      : 41788344 bps   US Attainable Rate   : 11742694 bps

Latest Readings - DS Attainable Rate : 44409816 bps US Attainable Rate : 11758524 bps

Yeah, just does not show the change via the UI
[Image: mW9Hfp0.png]
Reply

#49
That is interesting...…….. just shows stats as modem boots up for first set of readings, at least you know what to do for future readings.


The DrayTeK ui is rather basic,
UK Sentinel


DrayTeK 130 Modem connected to Netgear XR500, ASUS RT-AC86U then connected to Netgear XR500 

Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

This Forum was originally created to provide a means to allow users of ASUS (SOHO) Routers - both Wireless and xDSL (modem) based to freely communicate within a Community type forum where members can work together towards sharing experience, knowledge and ideas, I have recently also been asked to include Netgear and AVM wifi / modem based routers for discussion. All I ask is that we are all fair and reasonable, we try to add value where we can and not use this forum for other non community agendas and lastly, please feel free to dop me a message offline if you feel in anyways I can improve upon this site etc.
By clicking this Link you help to Support this Forum when you buy any items from AMAZON

Forum software by © MyBB Theme © iAndrew 2016